|
Flashtec - OBDII serial programmer
Flashtec – OBDII serial programmer. It supports a large number of vehicles thanks to a continuous development of communication protocols. Flashtec features are the best solution for the professional tuner who wants modify ECU maps for the use of vehicles on road or in a racing track. Flashtec is an hardware interface that allows communication between ECU and PC. Through the use of OBDII connector, is possible read and write the ECU using the K Line or the CANbus for recent vehicles. Flashtec dedicated software allows to chose the vehicle, display data and number of ECU, manage download and upload of the files, chose writing speed and save injectors code when is necessary. A complete product also about "checksum" because allows an automatic correction during the step of writing, in this way the customer will save on the purchase of communication protocols. Moreover is possible buy only what is needed because all communication protocols of Flashtec are purchasables distinctly. Communication between Flashtec and ECU includes many options: - The connection with ECU can be established through K line or CANbus. - K2 cable for a direct connection with ECU through K line. This is dedicated to all the vehicles that doesn't uses OBDII standard - K4 cable is available for a direct connection on ECU pins when you are working in Boot Loader mode (get off ECU from vehicle) - User can setup the program has he wants. The file can be entirely programmed or only in maps sector - Is possible set reading and writing speed depending on the safe level that the user wants mantain. - With ScanTool features is possible check errors stored in memory and erase it automatically (Diagnostic Trouble Code) - Automatic checksum correction on recent vehicles - Communicartion protocols dedicated to only a group of vehicles - Online upgrade - Multilanguage Software (Italian, Portuguese, Catalan, Czech, English, Spanish, Hungarian). K4 cable Essential when is necesary get off the ECU from the vehicle. That tool is easy to use but is necessary a "pinout" to identify ECU pins to connect. The led in the case point out if the Ecu is supplied, so the user can operates in safety. Bootloader Bootloader is a Flashtec add-on that sets the ECU in a particular mode of work, this condition is called Boot. Flashtec comunicates with ECU (Take down the ECU, sold resistors and connect the instrument, following the instructions in the tutorial inside the software) in boot mode, this allows to read maps sector of eprom. With Bootloader is possible read and write ECUs excluded from usual communication protocols. Master/Slave function Flashtec is available also in configuration Master/Slave. This way of work allows to buy two or more devices those can exchange files only with themselves. With a master is possible to make a codified file readable only by the related Slave.
Minimal system requirements:
- Windows 2000/XP/Vista 32bit with 256Mb of RAM- 1024x768 display resolution - 1xUSB port - 100Mb hard disk free space
Screenshots can be zoomed by click on it  |  | | Pic.1 Main window | Pic.2 Available families list | | | |  |  | Pic.3 Getting ECU information
| Pic.4 Read ECU
|
| 
